|
|
|
Water Tower Place
Chicago, Illinois
The thin marble panels required re-affixing to this high-rise structure in the least invasive way while optimizing the load bearing performance of the connection ...
 |
|
|
Union Station
St Louis, Missouri
A historical building in the heart of St Louis, Union Station required an effective stabilization solution for its aging masonry ...
|
|
|
SUNY Maritime College
New York, New York
The building façade at SUNY Maritime College in New York City required eventual replacement of the shelf angles – however an interim solution was needed which would provide stability before and during future construction ...
|
|
|
One Shell Square
New Orleans, Louisiana
The extremely hard concrete in Louisiana precluded the use of SPIRA-LOK® Helical Ties originally intended for this project. The integrity of the connection in the veneer stone ...
|
|
|
Miami Center
Miami, Florida
Situated directly on the coast in Miami, Florida, the Citibank Tower was regularly subject to extremely high wind loads, sometimes reaching hurricane force – presenting a formidable stabilization challenge ...
|
|
|
Alice Tully Hall, Juilliard School
New York, New York
The thin travertine panels required re-affixing to the poured concrete structure in the most unobtrusive way to preserve the aesthetics of the building ...
|
|
|
City Hall
Charleston, South Carolina
The multi-wythe brick structure was to be strengthened to withstand a seismic event by installing a poured concrete frame inside the building. This concrete frame had to be tied into the existing structure...
|
|
|
5 Post Oak
Houston, Texas
Engineers of this 22-storey travertine-clad tower in Houston, Texas required a solution that would deliver robust stabilization ...
|
|
|
365 5th Avenue
New York, New York
A historical building in the heart of Manhattan, 365 5th Avenue required an effective stabilization solution for its aging masonry – a solution that would minimize damage done to its unique brickwork ...
|
|
|
|
|
|
 |
 SPIRA-LOK™
The Spira-Lok™ mechanical anchoring system is a simple and cost-effective method of re-connecting existing veneers to various substrates – eliminating the need to tear down existing...
 TORQ-LOK®
The Torq-Lok® mechanical anchoring system is a simple and cost-effective method of re-connecting existing veneers to various substrates – eliminating the need to tear down existing...
SPIRA-LOK™ The Spira-Lok™ mechanical anchoring system is a simple and cost-effective method of re-connecting existing veneers to various substrates – eliminating the need to tear down existing...
|
 System 2000
SYSTEM2000 incorporates a unique adjustable tie (Patented) with our traditional adjustable reinforcing systems. The unique shape allows for...
 Arbortech AS160
The award-winning AS160 Brick + Mortar Saw featuring Allsaw Technology™ represents a revolution in cutting technology. Using a unique patented orbital cutting motion...
 BL407
An innovative wire tie and plate combination system for anchoring veneers, BL407 anchors to the surface of sheathing or stud, providing adjustability, minimal free-play, strength, stiffness and corrosion resistance – all while maintaining the integrity of air barriers.
 BL507
An adjustable anchor and tie system for use in masonry cavity wall construction, BL507 is designed to meet building codes while allowing for vertical differential movement between wythes.
 BL607
An innovative wire tie and plate combination system for anchoring veneers, BL607 anchors to the surface of the stud, providing adjustability, minimal free-play, strength, stiffness and corrosion resistance.
MOR-CONTROL™
Mor-Control is manufactured from corrugated polypropylene-copolymer plastic. The fabricated shape slopes to shed moisture while the tabs project to lay in bed joint to suspend Mor-Control in cavity. The ends are fastened with nickel-zinc plated fasteners.
CELL-VENT™
Cell-Vent is manufactured from flexible ultra-violet resistant polypropylene-copolymer plastic. Cell-Vent maximizes cavity air flow and drainage with 60% free area, limits insect access, and keeps head joint free of mortar.
System 2000
SYSTEM2000 incorporates a unique adjustable tie (Patented) with our traditional adjustable reinforcing systems. The unique shape allows for...
|
Through our vast experience, unmatched technical expertise and a continued dedication to partnership, BLOK-LOK® Limited has grown to become a leading manufacturer and supplier of masonry reinforcing systems and ties.
HOHMANN & BARNARD acquires BLOK-LOK LTD
Hohmann and Barnard, Inc. , a Mitek / Berkshire Hathaway Company, (a subsidiary of Warren Buffett’s Berkshire Hathaway, Inc.), and the leading manufacturer of reinforcement, anchoring systems and accessories for masonry and stone, has acquired Blok-Lok, Ltd.
|
|
|
 |
