Ladder Joint Reinforcement



Product Image Item Name+
BL-10 Ladder Reinforcement

BL-10 Ladder Reinforcement

The BL-10 consists of two parallel side rods with cross rods welded at 16” (400 mm) O.C., thus forming a ladder configuration. Overall measurement (side-to-side rod) is approximately 2” (50 mm) less...
BL-11 Ladder Reinforcement

BL-11 Ladder Reinforcement

The BL-11 consists of three parallel side rods with cross rods welded at 16” (400 mm) O.C. Two side rods act as backup masonry reinforcement and the third rod and cross rod act as a continuous tie...
BL-12 Ladder Reinforcement

BL-12 Ladder Reinforcement

The BL-12 consists of four parallel side rods with cross rods welded at 16” (400 mm) O.C. Two side rods act as back-up masonry reinforcement and the other two side rods and cross rods act as a...
BL-21 Ladder Reinforcement

BL-21 Ladder Reinforcement

The BL-21 consists of ladder-type masonry reinforcing with box ties lap-welded every 16” (400 mm) O.C. They extend across the cavity or collar joint into the outer wythe and should be embedded a...
BL-40 Ladder Reinforcement

BL-40 Ladder Reinforcement

The BL-40 consists of a ladder-type masonry reinforcing for composite walls with box ties lap-welded every 16” (400 mm) O.C. that extend into the collar joint. A System 2000 wire tie is then engaged...
BL-42 Ladder Reinforcement

BL-42 Ladder Reinforcement

BL-42 is a ladder-type masonry reinforcing with box ties lap-welded every 16” (400 mm) O.C. extending into the cavity. A specially welded cross-bar across the box tie restrains the out-of-plane...

Copyright © 2018 BLOK-LOK

Privacy Policy | Safe Harbor
12 Ashbridge Circle | Woodbridge, Ontario, L4L 3R5, Canada
Phone: 905.266.2277 | Fax: 905.266.2272 | U.S. Toll Free: 800.561.3026
E-mail