BL-10 Ladder Reinforcement

Ask a question

The BL-10 consists of two parallel side rods with cross rods welded at 16” (400 mm) O.C., thus forming a ladder configuration.

  • Overall measurement (side-to-side rod) is approximately 2” (50 mm) less than the nominal wall thickness.
  • A fabricated ladder-type reinforcement designed to be embedded in the horizontal mortar joints of masonry walls.
AVAILABLE FINISHES:
Finish Material Specification Coating Specification Minimum Coating Mass
Mill Galvanized Wire CSA A370-14 A641 .010”
Hot Dipped Galvanized After Fabrication Wire CSA A370-14 ASTM A153 Class B2 1.50 oz/ft2 (457 g/m˛)
Stainless Steel Wire ASTM 79-AISI, Type 302 & 304 None Uncoated
NOTE:
  • Bed joint alignment for connecting wythes recommended
  • Complies with ASTM C951, ACI 530 for joint reinforcement, CSA standard A370
PACKAGING:
  • 10’ (3.048 m) lengths.
  • 25 pieces per bundle.

Copyright © 2018 BLOK-LOK

Privacy Policy | Safe Harbor
12 Ashbridge Circle | Woodbridge, Ontario, L4L 3R5, Canada
Phone: 905.266.2277 | Fax: 905.266.2272 | U.S. Toll Free: 800.561.3026
E-mail