Tie-2R

Ask a question

The Tie-2R Adjustable Anchor System for Rubble Stone walls with masonry backup allows the mason to place anchors where they are needed.

  • The joint reinforcement has deformed side rods, a cross rod and a heavy duty side rod projecting into the cavity.
  • To this rod the stone mason attaches Helical Hook Anchors with an easy twist.
  • Anchor Type HS is for horizontal joints and Type HP for vertical joints. (refer to images below)
  • The mason can fit the ties to the wall rather than having to build the wall to fit the ties.
  • Rigid insulation is easily applied between the wythes.
Tie-2R Type HS
larger image
Tie-2R Type HP
larger image
DIMENSIONS:
  • 9 ga. deformed side rods
  • 3/16” dia. cross rod
  • 1/4” dia. heavy duty side rod
AVAILABLE FINISHES:
Finish Material Specification Coating Specification Minimum Coating Mass
Hot Dipped Galvanized After Fabrication Wire CSA A370-14 ASTM A153 Class B2 1.50 oz/ft2 (457 g/m˛)
Stainless Steel Wire ASTM 79-AISI, Type 302 & 304 None Uncoated
PACKAGING:
  • 10' (3.048 m) lengths.
  • 25 pieces per bundle.

Copyright © 2018 BLOK-LOK

Privacy Policy | Safe Harbor
12 Ashbridge Circle | Woodbridge, Ontario, L4L 3R5, Canada
Phone: 905.266.2277 | Fax: 905.266.2272 | U.S. Toll Free: 800.561.3026
E-mail